code comments changes

tests/test_commands.py

@@ -83,7 +83,7 @@ assert terminal.screen.theme_is_dark is True
 # without mode 2031 the app is not interrupted
 assert recorder.written == "", repr(recorder.written)
 
-# with it, the dark/light report is sent so the agent can restyle itself
+# with it, the dark/light report is sent so the app can restyle itself
 stream.feed("\x1b[?2031h")
 recorder.written = ""
 terminal.apply_scheme()

tests/test_emulator.py

@@ -24,7 +24,7 @@ def feed(stream, data, char_by_char=False):
 def run_case(char_by_char):
     tag = "char-by-char" if char_by_char else "chunked"
 
-    # DA1 answered (Claude Code's untimed sentinel)
+    # DA1 answered; apps can wait on it with no timeout
     proc, screen, stream = make()
     feed(stream, "\x1b[c", char_by_char)
     assert proc.written == "\x1b[?62;22c", (tag, proc.written)
@@ -34,7 +34,7 @@ def run_case(char_by_char):
     feed(stream, "\x1b[5;10H\x1b[6n\x1b[?6n", char_by_char)
     assert proc.written == "\x1b[5;10R\x1b[?5;10R", (tag, proc.written)
 
-    # XTVERSION then DECRQM 2026 (the Claude Code probe sequence)
+    # XTVERSION then DECRQM 2026, the sync-output probe sequence
     proc, screen, stream = make()
     feed(stream, "\x1b[>0q\x1b[c\x1b[?2026$p\x1b[c", char_by_char)
     assert proc.written == (
@@ -54,8 +54,8 @@ def run_case(char_by_char):
     # and nothing leaked to the screen
     assert screen.buffer[0][0].data == " ", (tag, screen.buffer[0][0])
 
-    # modifyOtherKeys: the level is tracked (pi enables it and reads shift+enter
-    # no other way), and the sequence must not corrupt SGR state
+    # modifyOtherKeys: the level is tracked, and the sequence must not corrupt
+    # SGR state
     proc, screen, stream = make()
     assert screen.modify_other_keys == 0, tag
     feed(stream, "\x1b[>4;2mhello", char_by_char)
@@ -211,8 +211,8 @@ def run_resize_cases():
     feed(stream, "\x1b[?1049l", False)
     assert max(screen.buffer[0]) < 8, sorted(screen.buffer[0])
 
-    # a shrink clamps the cursor (pyte does it via restore_cursor); without
-    # the clamp draw() writes to rows above or below the screen
+    # a shrink clamps the cursor; without the clamp draw() writes to rows
+    # above or below the screen
     proc, screen, stream = make(10, 8)
     feed(stream, "\r\n".join("line{}".format(i) for i in range(8)), False)
     feed(stream, "\x1b[1;1H", False)  # full screen, cursor at home
@@ -239,8 +239,8 @@ def run_resize_cases():
 
 
 def run_private_csi_cases():
-    """No private CSI may raise: an exception here used to kill the renderer
-    thread and freeze the tab. aerc probes XTSMGRAPHICS (ESC[?2;1;0S)."""
+    """No private CSI may raise: an exception here kills the renderer thread
+    and freezes the tab. aerc probes XTSMGRAPHICS (ESC[?2;1;0S)."""
     for final in "ABCDEFGHJKLMPSTXZbcdfghlmnqrstu@":
         proc, screen, stream = make()
         stream.feed("\x1b[?2;1;0" + final)          # multi-parameter private CSI
@@ -269,9 +269,9 @@ def run_private_csi_cases():
 def run_decscnm_cases():
     """A DECSCNM flash (vim's visual bell) must not outlive itself.
 
-    pyte points every line at the blank cell from inside set/reset_mode, so a
-    line kept a reverse default and painted the columns the app never wrote —
-    vim skips indentation with cursor-forward — as white blocks.
+    The lines point at the blank cell, so one keeping a reverse default paints
+    the columns the app never wrote — vim skips indentation with cursor-forward
+    — as white blocks.
     """
     from vterm.render import segment_buffer_line
 
@@ -327,7 +327,7 @@ def run_fast_path_cases():
         return (rows, c.x, c.y, c.attrs, set(screen.mode), screen.title)
 
     def parser_only(blob):
-        """The blob through the coroutine parser alone: pyte's original feed."""
+        """The blob through the coroutine parser alone, bypassing the fast path."""
         proc, screen, stream = make(columns=30, lines=8)
         import pyte
         pyte.Stream.feed(stream, blob)
@@ -407,7 +407,7 @@ def run_clear_cases():
     assert len(screen.history) > 0, "history suppressed for too long"
 
     # ED 3 is app-driven: it clears scrollback and fires the clear callback,
-    # but (as in xterm, unlike pyte) leaves the visible screen alone
+    # but (as in xterm) leaves the visible screen alone
     cleared = []
     proc = FakeProcess()
     screen = VtScreen(10, 4, process=proc, clear_callback=lambda: cleared.append(1))
@@ -418,8 +418,8 @@ def run_clear_cases():
     assert len(screen.history) == 0 and cleared, (len(screen.history), cleared)
     assert screen.buffer[0][0].data == "a", screen.buffer[0][0]
 
-    # with erase_scrollback off, ED 3 is a no-op: agents repaint with it and
-    # would take the history and the view with them
+    # with erase_scrollback off, ED 3 is a no-op: an app repainting with it
+    # would take the history and the view with it
     cleared = []
     proc = FakeProcess()
     screen = VtScreen(10, 4, process=proc, erase_scrollback=False,

tests/test_imports.py

@@ -54,8 +54,8 @@ for char in string.ascii_letters + string.digits + string.punctuation:
 assert get_key_code(key="space") == " ", "space must send a space"
 
 # legacy encodings by default; while the app has modifyOtherKeys on, the keys
-# whose modified form is ambiguous take the CSI 27 form instead. pi reads a
-# bare ESC CR as alt+enter and submits on it
+# whose modified form is ambiguous take the CSI 27 form instead. a bare ESC CR
+# reads as alt+enter
 assert get_key_code(key="enter", shift=True) == "\x1b\r"
 assert get_key_code(key="enter", shift=True, modify_other_keys=2) == "\x1b[27;2;13~"
 assert get_key_code(key="space", ctrl=True, modify_other_keys=2) == "\x1b[27;5;32~"

tests/test_render.py

@@ -226,8 +226,8 @@ assert len(selection) == 1 and selection[0].empty(), \
 print("selection tests passed (user selection survives renders, caret still tracked)")
 
 
-# an app that hides the cursor (pi hides it for good) still needs the caret:
-# sublime drops a space keypress in a view that has no caret at all
+# an app that hides the cursor still needs the caret: sublime drops a space
+# keypress in a view that has no caret at all
 selection.clear()
 stream.feed("\x1b[?25l")
 focus_cursor(terminal.view, None, terminal)
@@ -326,7 +326,7 @@ command.run(None)
 kept = [(r.begin(), r.end()) for r in terminal.view.sel()]
 assert any(b != e for b, e in kept), "user selection was dropped: {}".format(kept)
 
-# pyte's dirty is a repaint hint: rows whose content did not change must not
+# the dirty set is a repaint hint: rows whose content did not change must not
 # be rewritten (each rewrite is a cross-process call and an on_modified)
 rewritten = []
 _replace = terminal.view.replace
@@ -523,8 +523,8 @@ print("view scroll tests passed (a screen or a row per press, clamped to the anc
 
 
 # shift+enter through the whole keypress path: ESC CR by default, and the CSI 27
-# form once the app turned modifyOtherKeys on. pi enables it (its kitty probe
-# gets no flags from us) and reads a bare ESC CR as alt+enter, which submits
+# form once the app turned modifyOtherKeys on, which it reaches for because a
+# bare ESC CR reads as alt+enter
 press(key="enter", shift=True)
 assert terminal.process.written == "\x1b\r", repr(terminal.process.written)
 stream.feed("\x1b[>4;2m")

vterm/commands.py

@@ -22,14 +22,7 @@ class VtermOpenCommand(sublime_plugin.WindowCommand):
     """Open a terminal in a new tab. `vterm_open`, the only entry point users bind."""
 
     def run(self, cmd=None, cwd=None, env=None, title=None):
-        """Start `cmd` (default: a login shell) in a fresh view.
-
-        Args:
-            cwd: defaults to the first project folder, else the active file's
-                directory, else the home directory.
-            env: extra environment on top of the child defaults.
-            title: tab name; the program name unless the app sets its own.
-        """
+        """Start `cmd` (default: a login shell) in a fresh view"""
         window = self.window
 
         if not cmd:
@@ -38,7 +31,7 @@ class VtermOpenCommand(sublime_plugin.WindowCommand):
         elif isinstance(cmd, str):
             cmd = [cmd]
 
-        # the app may override the title via OSC 0/2 later
+        # cwd: the first project folder, else the active file's directory, else home
         if not cwd:
             folders = window.folders()
             view = window.active_view()
@@ -144,9 +137,7 @@ class VtermKeypressCommand(sublime_plugin.TextCommand):
     """Sends one key to the app. Every key binding in the generated keymap lands here."""
 
     def run(self, _, **kwargs):
-        """Args:
-        kwargs: key name plus modifier flags, straight from the keymap.
-        """
+        """Send one key; the name and modifier flags come straight from the keymap"""
         terminal = Terminal.from_id(self.view.id())
         if not terminal or not terminal.alive:
             return
@@ -158,13 +149,11 @@ class VtermKeypressCommand(sublime_plugin.TextCommand):
         terminal.send_key(**kwargs)
 
     def view_scrolled(self, terminal, key=None, **mods):
-        """Scroll the view over the scrollback, before vterm_show_cursor, whose
-        scroll would pull the viewport straight back down. PgUp/PgDn move a
-        screen, Up/Down one line. The alt screen has its scrollback folded
-        away, so an app there keeps the key.
+        """Whether the view consumed the key by scrolling over the scrollback.
 
-        Returns:
-            bool: the view consumed the key; False sends it to the app.
+        Runs before vterm_show_cursor, whose scroll would pull the viewport
+        straight back down. PgUp/PgDn move a screen, Up/Down one line. On the
+        alt screen the scrollback is folded away, so the app keeps the key.
         """
         # the cheap tests first: this runs on every keystroke
         if key not in SCROLL_KEYS or not mods or terminal.screen.alternate_buffer_mode:
@@ -206,10 +195,7 @@ class VtermPasteTextCommand(sublime_plugin.TextCommand):
     """Sends arbitrary text to the app, bracketed when it asked for that."""
 
     def run(self, edit, text, bracketed=True):
-        """Args:
-        bracketed: wrap in paste brackets, if the app enabled ?2004. IME
-            text comes through unbracketed — it was typed, not pasted.
-        """
+        """Send text to the app, wrapped in paste brackets when it enabled ?2004"""
         terminal = Terminal.from_id(self.view.id())
         if not terminal:
             return

vterm/emulator.py

@@ -1,4 +1,4 @@
-""" Terminal emulation: pyte screen and a parser that handles prefixed CSI, DECRQM and multi-digit OSC """
+""" Terminal emulation: the screen and a parser for prefixed CSI, DECRQM and multi-digit OSC """
 import base64
 import logging
 import re
@@ -36,7 +36,7 @@ ANSI_COLORS = [
     "light_white",
 ]
 
-# SGR 90-97 / 100-107: the bright colours, which stock pyte does not map
+# SGR 90-97 / 100-107: the bright (aixterm) colours
 FG_AIXTERM = {90 + i: ANSI_COLORS[8 + i] for i in range(8)}
 BG_AIXTERM = {100 + i: ANSI_COLORS[8 + i] for i in range(8)}
 
@@ -44,7 +44,7 @@ BG_AIXTERM = {100 + i: ANSI_COLORS[8 + i] for i in range(8)}
 REPORTABLE_MODES = (mo.DECAWM >> 5, mo.DECTCEM >> 5, 1000, 1002, 1003, 1004, 1006, 1049, 2004, 2026)
 
 # DEC private modes, pre-shifted into pyte's internal representation.
-# 1: DECCKM, application cursor keys (arrows send SS3); pyte has no name for it
+# 1: DECCKM, application cursor keys (arrows send SS3)
 APP_CURSOR_MODE = 1 << 5
 # 2026: synchronized output, the app is mid-frame and we should not draw
 SYNC_MODE = 2026 << 5
@@ -78,8 +78,8 @@ def _copy_line(line):
 def quantize_256(r, g, b):
     """Nearest xterm-256 index: grays to the ramp, colours to the 6x6x6 cube.
 
-    Truecolor is folded into the 256 palette so the colour-scheme rule table
-    stays bounded (each distinct combo becomes a scheme rule and a file write)."""
+    Truecolor is folded into the palette so the scheme rule table stays bounded:
+    each distinct combo costs a rule and a file write."""
     if r == g == b:
         if r < 8:
             return 16
@@ -102,18 +102,11 @@ Char = namedtuple(
 
 
 class Cursor:
-    """Cursor position and pending attributes.
-
-    Replaces pyte's own so a Char carrying the extra `linefeed` field can be
-    the default attribute set.
-    """
+    """Cursor position and the attributes new text inherits"""
 
     __slots__ = ("x", "y", "attrs", "hidden")
 
     def __init__(self, x, y, attrs=Char(" ")):
-        """Args:
-        attrs: the Char whose styling new text inherits.
-        """
         self.x = x
         self.y = y
         self.attrs = attrs
@@ -121,18 +114,15 @@ class Cursor:
 
 
 class VtScreen(pyte.Screen):
-    """Screen with the terminal features these agents rely on.
-
-    Adds to pyte: the alternate screen, scrollback, synchronized output,
+    """Screen with alternate buffer, scrollback, synchronized output,
     mouse/focus/paste modes, cursor styles, query replies and OSC handling.
+
     Mutated only by the renderer thread, so it carries no lock.
     """
 
     @property
     def default_char(self):
-        """The blank cell an untouched column holds."""
-        # pyte's base property cannot be shadowed by an instance attribute;
-        # the value is maintained on reset and DECSCNM flips
+        """The blank cell an untouched column holds"""
         return self._default_char
 
     def __init__(
@@ -148,14 +138,7 @@ class VtScreen(pyte.Screen):
         bg_color="000000",
         is_dark=True,
     ):
-        """Args:
-        process: written to directly when the app queries the terminal.
-        history: scrollback depth, in lines.
-        erase_scrollback: whether ED 3 drops the scrollback, as a terminal should.
-        clear_callback: the app cleared the screen; the view follows.
-        clipboard_callback: an OSC 52 payload for the system clipboard.
-        fg_color, bg_color, is_dark: palette facts reported back to the app.
-        """
+        """Set up the buffers, the caches and the palette facts reported to the app"""
         self._process = process
         self._erase_scrollback = erase_scrollback
         self._clear_callback = clear_callback
@@ -178,7 +161,7 @@ class VtScreen(pyte.Screen):
         super().__init__(columns, lines)
 
     def reset(self):
-        """RIS: pyte's reset plus our cursor, scrollback and caches."""
+        """RIS: reset the screen along with the cursor, scrollback and caches"""
         self._default_char = Char(data=" ", fg="default", bg="default", reverse=False)
         self._sgr_cache.clear()
         super().reset()
@@ -194,20 +177,12 @@ class VtScreen(pyte.Screen):
         self.cursor_style = style
 
     def set_modify_other_keys(self, resource=0, value=0):
-        """xterm CSI > 4 ; n m: send modified keys as CSI 27 ; mod ; code ~.
-
-        pi turns this on whenever the kitty probe answers with no flags, and
-        reads shift+enter no other way.
-        """
+        """xterm CSI > 4 ; n m: send modified keys as CSI 27 ; mod ; code ~"""
         if resource == 4:
             self.modify_other_keys = value
 
     def resize(self, lines=None, columns=None):
-        """Resize the screen, pushing scrolled-off lines into scrollback.
-
-        Unlike pyte's, shrinking preserves content: rows that no longer fit go
-        to history rather than being dropped.
-        """
+        """Resize the screen; on a shrink the rows that no longer fit go to scrollback"""
         lines = lines or self.lines
         columns = columns or self.columns
 
@@ -239,8 +214,7 @@ class VtScreen(pyte.Screen):
                         line.pop(x, None)
 
         self.lines, self.columns = lines, columns
-        # pyte clamps via restore_cursor; without it a shrink leaves the cursor
-        # negative or past the new edge. x == columns keeps a pending wrap
+        # a shrink can leave the cursor past the new edge; x == columns keeps a pending wrap
         self.cursor.x = min(self.cursor.x, columns)
         self.cursor.y = min(max(self.cursor.y, 0), lines - 1)
         self.set_margins()
@@ -272,9 +246,8 @@ class VtScreen(pyte.Screen):
         if reverse != self._default_char.reverse:
             self._default_char = self._default_char._replace(reverse=reverse)
             self._sgr_cache.clear()
-            # pyte points every line at the old blank cell from inside
-            # set/reset_mode, before this runs; a stale one paints the columns
-            # the app never wrote reverse for good
+            # the lines still point at the old blank cell, which would paint
+            # untouched columns reversed for good
             for line in self.buffer.values():
                 line.default = self._default_char
 
@@ -340,12 +313,11 @@ class VtScreen(pyte.Screen):
         return BRACKETED_PASTE_MODE in self.mode
 
     def draw(self, data):
-        """Write text at the cursor, wcwidth-aware, marking hard wraps.
+        """Write text at the cursor, wcwidth-aware, marking soft wraps.
 
-        Differs from pyte: double-width cells claim two columns, combining marks
-        are merged into the preceding cell as NFC (sublime renders decomposed
-        sequences badly), and an autowrap sets `linefeed` on the last cell so
-        copy can tell a soft wrap from a real newline.
+        Double-width cells claim two columns, combining marks merge into the
+        preceding cell as NFC, and an autowrap sets `linefeed` on the last cell
+        so copy can tell a soft wrap from a real newline.
         """
         if self.charset:
             data = data.translate(self.g1_charset)
@@ -359,8 +331,7 @@ class VtScreen(pyte.Screen):
         cursor = self.cursor
         buffer = self.buffer
         columns = self.columns
-        # cells only differ by their data while attrs are unchanged, so a
-        # per-run cache turns the namedtuple rebuild into a dict lookup
+        # per-run cache: cells differ only by their data while attrs are unchanged
         if cursor.attrs is not self._cache_attrs:
             self._cache_attrs = cursor.attrs
             self._char_cache = {}
@@ -431,10 +402,10 @@ class VtScreen(pyte.Screen):
         super().index()
 
     def erase_in_display(self, how=0, *args, **kwargs):
-        """ED: erase part of the screen, keeping what scrolls away.
+        """ED: erase part of the screen.
 
-        Unlike pyte's, a full clear (or a clear-to-end from home) pushes the
-        current screen into scrollback first, so `clear` does not lose history.
+        A full clear (or a clear-to-end from home) pushes the screen into
+        scrollback first, so `clear` does not lose history.
         """
         if not self.alternate_buffer_mode and (how == 2 or (how == 0 and self.cursor.x == 0 and self.cursor.y == 0)):
             self.push_lines_into_history()
@@ -470,8 +441,8 @@ class VtScreen(pyte.Screen):
     def select_graphic_rendition(self, *attrs, **kwargs):
         """Apply an SGR sequence to the cursor attributes.
 
-        Adds to pyte: bright (aixterm) colours, and truecolor folded into the
-        256 palette. Transitions are memoized — TUIs cycle through a handful of
+        Covers bright (aixterm) colours and truecolor folded into the 256
+        palette. Transitions are memoized: TUIs cycle through a handful of
         sequences thousands of times per frame.
         """
         if not attrs or attrs == (0,):
@@ -575,14 +546,12 @@ class VtScreen(pyte.Screen):
             count = self.first_non_empty_line_from_bottom() + 1
         self.history.extend(_copy_line(self.buffer[y]) for y in range(count))
 
-    # replies go to the pty, never to the screen
-
     def write_process_input(self, data):
-        """Send a reply to the app. Query answers go to the pty, never to the screen."""
+        """Send a query reply to the app: it goes to the pty, never to the screen"""
         self._process.write(data)
 
     def report_device_attributes(self, mode=0, **kwargs):
-        """DA1: claim to be a VT220 with ANSI colour. Claude Code waits on this with no timeout."""
+        """DA1: claim to be a VT220 with ANSI colour"""
         if kwargs.get("private"):
             return
         if mode == 0:
@@ -603,7 +572,7 @@ class VtScreen(pyte.Screen):
             marker = "?" if private else ""
             self.write_process_input("\x1b[{}{};{}R".format(marker, y, x))
         elif mode == 996 and private:
-            # color-scheme report, pi asks with a 2s timeout
+            # color-scheme report
             self.write_process_input(self.theme_report())
 
     def theme_report(self):
@@ -628,7 +597,7 @@ class VtScreen(pyte.Screen):
     def report_kitty_keyboard(self):
         """Answer the kitty keyboard protocol probe."""
         # answering at all means "supported"; 0 flags means none are enabled,
-        # which is what steers pi onto its modifyOtherKeys fallback
+        # which steers an app onto its modifyOtherKeys fallback
         self.write_process_input("\x1b[?0u")
 
     def handle_osc(self, code, payload, terminator):
@@ -656,24 +625,21 @@ class VtScreen(pyte.Screen):
 # a complete plain CSI: params then a final byte. No private marker, prefix or
 # intermediate — those forms, and sequences split across reads, take the parser
 CSI_COMPLETE = re.compile("(?:\x1b\\[|\x9b)([0-9;]*)([@-~])")
-# a read ending mid-CSI; held for the next read, as the parser would hold state.
-# bounded so a run of digits with no final cannot buffer forever
+# a read ending mid-CSI, held for the next read; bounded so a run of digits
+# with no final byte cannot buffer forever
 CSI_PARTIAL = re.compile("(?:\x1b\\[?|\x9b)[0-9;]{0,32}$")
 
 
 class VtStream(pyte.Stream):
-    """pyte.Stream with a parser for prefixed CSI, DECRQM and multi-digit OSC
+    """Stream with a parser for `>`/`<`/`=` prefixed CSI, the DECRQM `$p`
+    intermediate and multi-digit OSC codes.
 
-    Stock pyte drops what these agents rely on: `>`/`<`/`=` prefixed CSI, the
-    DECRQM `$p` intermediate, and OSC codes longer than one digit.
-
-    feed() dispatches complete plain CSI and lone control characters directly:
-    pyte resumes the parser coroutine once per character, which was ~90% of the
-    cost of an escape-heavy flood.
+    feed() dispatches complete plain CSI and lone control characters directly,
+    rather than resuming the parser coroutine once per character.
     """
 
     def __init__(self, *args, **kwargs):
-        """Copy the CSI table before adding to it, so pyte's class-level one is untouched."""
+        """Copy the CSI table before adding to it: the class-level one is shared"""
         self.csi = dict(self.csi)
         self.csi["S"] = "scroll_up"
         self.csi["T"] = "scroll_down"
@@ -683,10 +649,10 @@ class VtStream(pyte.Stream):
         super().__init__(*args, **kwargs)
 
     def attach(self, screen):
-        """Bind the fast dispatch tables when the listener is known."""
+        """Bind the fast dispatch tables once the listener is known"""
         super().attach(screen)
-        # same construction as the parser's create_dispatcher, so an unknown
-        # final lands on listener.debug either way
+        # built like the parser's dispatchers, so an unknown final byte lands
+        # on listener.debug either way
         self._fast_csi = defaultdict(
             lambda: screen.debug,
             {final: getattr(screen, name) for final, name in self.csi.items()},
@@ -696,15 +662,13 @@ class VtStream(pyte.Stream):
         self._fast_basic = {char: getattr(screen, name) for char, name in self.basic.items() if char not in (ctrl.SI, ctrl.SO)}
 
     def feed(self, data):
-        """pyte's feed with a ground-state fast path.
+        """Parse data into the screen, with a ground-state fast path.
 
-        Plain text runs keep pyte's regex path. A complete unprefixed CSI is
-        matched whole and dispatched in one call, and basic controls (CR, LF,
-        tab...) in one lookup, instead of one coroutine resume per character.
-        Everything else — OSC, charsets, private/prefixed CSI, `:` subparams —
-        falls through to the parser, byte for byte as before. A read ending
-        mid-CSI is carried into the next read; the parser would hold it as
-        state, so nothing is dispatched either way until the sequence is whole.
+        A complete unprefixed CSI is dispatched in one call and a lone control
+        character in one lookup; everything else — OSC, charsets,
+        private/prefixed CSI, `:` subparams — falls through to the parser. A
+        read ending mid-CSI is carried into the next one, so nothing dispatches
+        until the sequence is whole.
         """
         # the tail of the previous read ended mid-CSI; complete it first
         if self._carry:
@@ -728,7 +692,7 @@ class VtStream(pyte.Stream):
         offset = 0
         while offset < length:
             if taking_plain_text:
-                # printable run: hand it to draw() whole (pyte's own fast path)
+                # printable run: hand it to draw() whole
                 match = match_text(data, offset)
                 if match:
                     start, offset = match.span()
@@ -739,7 +703,6 @@ class VtStream(pyte.Stream):
                     # complete plain CSI: dispatch here, skipping the parser
                     match = match_csi(data, offset)
                     if match:
-                        # params memo: SGR strings repeat across a whole frame
                         raw = match.group(1)
                         params = cache.get(raw)
                         if params is None:
@@ -750,7 +713,7 @@ class VtStream(pyte.Stream):
                         try:
                             csi[match.group(2)](*params)
                         except TypeError:
-                            # same guard as _dispatch_csi: excess params cost one sequence, not the chunk
+                            # excess params cost one sequence, not the chunk
                             LOG.debug("malformed CSI %s%s", params, match.group(2))
                         offset = match.end()
                         continue
@@ -776,11 +739,9 @@ class VtStream(pyte.Stream):
         self._taking_plain_text = taking_plain_text
 
     def _parser_fsm(self):
-        """Coroutine pyte feeds one character at a time; `yield True` resumes bulk text.
+        """Parser coroutine, fed one character at a time; `yield True` resumes bulk text.
 
-        A full copy of pyte's FSM rather than a hook, because the additions are
-        inside its inner loops. Locals are bound up front: this runs per byte of
-        every escape sequence.
+        Locals are bound up front: this runs per byte of every escape sequence.
         """
         basic = self.basic
         listener = self.listener
@@ -829,7 +790,7 @@ class VtStream(pyte.Stream):
                     elif char == "%":
                         self.select_other_charset((yield None))
                     elif char in "()":
-                        # honoured even in UTF-8 mode, which pyte skips: smacs is ESC(0
+                        # honoured even in UTF-8 mode: xterm-256color's smacs is ESC(0
                         listener.define_charset((yield None), mode=char)
                     else:
                         escape_dispatch[char]()
@@ -873,7 +834,7 @@ class VtStream(pyte.Stream):
                         self._dispatch_csi(csi_dispatch, listener, char, params, private, prefix, intermediate)
                         break
             # OSC: a code of up to 8 digits, then a payload up to MAX_OSC,
-            # ending at BEL or ST. pyte only accepts a single-digit code
+            # ending at BEL or ST
             elif char == OSC_C1:
                 code = ""
                 while True:
@@ -907,8 +868,8 @@ class VtStream(pyte.Stream):
     def _dispatch_csi(self, csi_dispatch, listener, final, params, private, prefix, intermediate):
         """Route a CSI by its intermediate, prefix and private marker.
 
-        The forms pyte has no table for are handled here; a private sequence we
-        do not implement is dropped rather than run in its non-private meaning.
+        An unimplemented private sequence is dropped rather than run in its
+        non-private meaning.
         """
         if intermediate == "$":
             if final == "p":

vterm/keys.py

@@ -107,25 +107,18 @@ def _modifier_code(ctrl, alt, shift):
 
 def get_key_code(key, ctrl=False, alt=False, shift=False, application_mode=False, new_line_mode=False,
                  modify_other_keys=0):
-    """Escape sequence for a key name and its modifiers.
-
-    Args:
-        key: key name from the keymap, or a single literal character.
-        application_mode: DECCKM is set, so cursor keys take their SS3 form.
-        new_line_mode: LNM is set, so enter sends CR LF.
-        modify_other_keys: the level the app asked for with CSI > 4 ; n m.
-
-    Returns:
-        str: the bytes to write to the pty.
-    """
+    """Escape sequence for a key name and its modifiers, honouring the app's active modes"""
     key_lo = key.lower() if len(key) > 1 else key
 
+    # the keys with an xterm modified form of their own
     if (ctrl or alt or shift) and key_lo in _MODIFIABLE_CSI:
         return _MODIFIABLE_CSI[key_lo].format(_modifier_code(ctrl, alt, shift))
 
+    # the ambiguous ones, while the app asked for CSI 27
     if modify_other_keys and (ctrl or alt or shift) and key_lo in _OTHER_KEYS:
         return "\x1b[27;{};{}~".format(_modifier_code(ctrl, alt, shift), _OTHER_KEYS[key_lo])
 
+    # ctrl folds to a control byte, alt prefixes ESC, shift is bare text
     if ctrl:
         base = key_lo
         if base in _CTRL_KEY_MAP:

vterm/listeners.py

@@ -13,7 +13,6 @@ class VtermCoreEventListener(sublime_plugin.EventListener):
     """
 
     def __init__(self):
-        """Track carets per view, for the insert-detection in on_modified."""
         # view id -> last caret position, to work out what sublime just inserted
         self._cursor = {}
 
@@ -56,7 +55,6 @@ class VtermCoreEventListener(sublime_plugin.EventListener):
         raise a key event — it arrives as an `insert` command. Text the emulator
         did not produce must never stay in the view.
         """
-        # printables and IME text arrive as sublime inserts, not keypresses
         terminal = Terminal.from_id(view.id())
         if not terminal:
             return
@@ -86,7 +84,7 @@ class VtermCoreEventListener(sublime_plugin.EventListener):
         self._cursor[view.id()] = view.sel()[0].end()
 
     def on_query_context(self, view, key, operator, operand, match_all):
-        """Answer the contexts the mousemap needs; keymap contexts are native."""
+        """Answer the contexts the mousemap needs"""
         # keymap contexts are native "setting.x"; mousemaps do not evaluate
         # those the same way, so their flags still need the hook
         if key not in ("vterm_view", "vterm_view.wheel_captured"):

vterm/mouse.py

@@ -13,16 +13,15 @@ from .terminal import Terminal
 WHEEL_UP = 64
 WHEEL_DOWN = 65
 
-# lines per wheel tick, as iTerm2 delivers per notch; pi scrolls exactly one
-# line per report and has no setting of its own
+# lines per wheel tick, as iTerm2 delivers per notch
 WHEEL_LINES = 3
 
 
 def send_scroll(terminal, up, lines, cell=None):
     """Report `lines` scroll lines to the app, or fake arrow keys on the alt screen.
 
-    One report per line, never one batched write: pi matches the SGR form
-    against a whole stdin chunk and drops anything longer."""
+    One report per write, never a batch: an app may match the SGR form against
+    a whole stdin chunk and drop anything longer."""
     if terminal.screen.mouse_reporting_enabled():
         if cell is None:
             cell = (1, terminal.screen.lines // 2 + 1)
@@ -38,8 +37,8 @@ def send_scroll(terminal, up, lines, cell=None):
 def _event_to_cell(view, terminal, event, clamp=False):
     """Map a mouse event to 1-based (col, row) on the live screen, or None.
 
-    `clamp` pulls a point above or below the screen onto the nearest row: the
-    wheel still belongs to the app, while a click there does not."""
+    Clamping pulls a point above or below the screen onto the nearest row: the
+    wheel still belongs to the app there, a click does not."""
     pt = view.window_to_text((event["x"], event["y"]))
     row, col = view.rowcol(pt)
     row -= terminal.offset

vterm/render.py

@@ -12,7 +12,7 @@ import sublime
 import sublime_plugin
 from wcwidth import wcswidth
 
-# per-cell call in segment_buffer_line; pyte caches its own wcwidth likewise
+# per-cell call in segment_buffer_line
 cell_width = lru_cache(maxsize=4096)(wcswidth)
 
 from .scheme import scheme_manager
@@ -125,8 +125,8 @@ class VtermRenderCommand(sublime_plugin.TextCommand):
         """Set up this view's render caches."""
         super().__init__(*args, **kwargs)
         self.colored_lines = {}
-        # view row -> (segments, lf) as last rendered; pyte's dirty means
-        # "repaint hint", so most dirty rows are identical frame to frame
+        # view row -> (segments, lf) as last rendered; the dirty set is only a
+        # repaint hint, so most dirty rows are identical frame to frame
         self._row_cache = {}
         self._key_counter = 0
         # chunk ordinal -> scopes it holds a key for; ordinals are view row +
@@ -199,11 +199,11 @@ class VtermRenderCommand(sublime_plugin.TextCommand):
         screen.dirty.clear()
 
     def sync_alt_fold(self, terminal):
-        """Hide the scrollback while the app owns the alt screen: fold it away
-        (the view text is its only copy).
-        The fold is re-checked every render — the screen's first row is
-        replaced on every region scroll, and an edit at the fold boundary can
-        silently disturb a fold."""
+        """Fold the scrollback away while the app owns the alt screen; the view text is its only copy.
+
+        Re-checked every render: an edit at the fold boundary can silently
+        disturb a fold, and the screen's first row is replaced on every scroll.
+        """
         view = self.view
         alt = terminal.screen.alternate_buffer_mode
         if not alt and not terminal.applied_alt_screen:
@@ -303,17 +303,11 @@ class VtermRenderCommand(sublime_plugin.TextCommand):
                 self.update_line(edit, line + offset, buffer_line, columns)
 
     def update_line(self, edit, line, buffer_line, columns):
-        """Rewrite one view row from a screen row, unless it is unchanged.
-
-        Args:
-            line: absolute view row.
-            columns: screen width; the last cell's linefeed flag marks a soft
-                wrap, which gets the CONTINUATION sentinel.
-        """
+        """Rewrite one view row from a screen row, unless it is unchanged"""
         view = self.view
         lf = buffer_line[columns - 1].linefeed
         segments = list(segment_buffer_line(buffer_line))
-        # pyte's dirty set is a repaint hint, not a diff: most dirty rows come
+        # the dirty set is a repaint hint, not a diff: most dirty rows come
         # back identical, and rewriting one costs an edit plus its region churn
         rendered = (segments, lf)
         if self._row_cache.get(line) == rendered:
@@ -373,16 +367,10 @@ class VtermRenderCommand(sublime_plugin.TextCommand):
     def flush_chunk(self):
         """Merge the queued rows onto shared per-(scope, chunk) keys.
 
-        A scrollback row is never repainted, so its per-row keys used to live
-        until trimmed: a long coloured session held ~15k region keys, and every
-        key is a separate pass in sublime's redraw. Merging bounds the count at
-        scopes x (scrollback / CHUNK).
-
-        The merge waits for the chunk to close, because add_regions replaces a
-        key's whole set: merging every frame re-sent everything accumulated so
-        far, which is quadratic in CHUNK when output arrives a few rows a frame.
-        Until then the rows keep their per-row keys, so the count is bounded by
-        scopes x chunks plus one chunk's worth.
+        Every region key is a separate pass in sublime's redraw, so merging
+        bounds the count at scopes x (scrollback / CHUNK) plus one open chunk.
+        The merge waits for the chunk to close: add_regions replaces a key's
+        whole set, so merging every frame would be quadratic in CHUNK.
         """
         view = self.view
         rows, chunk = self._open_rows, self._open_chunk
@@ -526,8 +514,7 @@ def following(view, terminal):
 
 def bottom_y(view, terminal):
     """Viewport y that pins the bottom of the live screen to the bottom of the view."""
-    # layout_extent is maintained incrementally; text_to_layout(size()) forced
-    # a whole-buffer layout on every call
+    # layout_extent is maintained incrementally, unlike text_to_layout(size())
     viewport_y = view.layout_extent()[1] - view.viewport_extent()[1]
     offset_y = view.text_to_layout(view.text_point(terminal.offset, 0))[1]
     return max(offset_y, viewport_y)
@@ -566,9 +553,7 @@ class VtermShowCursorCommand(sublime_plugin.TextCommand):
     which has no edit token of its own."""
 
     def run(self, edit, scroll=True):
-        """Args:
-        scroll: also follow the output down to the cursor.
-        """
+        """Place the caret at the terminal cursor, optionally following the output down"""
         view = self.view
         terminal = Terminal.from_id(view.id())
         if not terminal:

vterm/scheme.py

@@ -116,7 +116,7 @@ class SchemeManager:
             self._listeners.remove(callback)
 
     def reload(self):
-        """Rebuild every rule for a new palette; colours resolve at add time, so they cannot be appended"""
+        """Rebuild every rule for a new palette, then notify the terminals"""
         if not self._initialized:
             # no scheme file to maintain yet; initialize() will read the setting
             return

vterm/terminal.py

@@ -150,8 +150,7 @@ class Terminal:
         """Whether an unfocused terminal may draw again.
 
         A frame costs a command dispatch and a dozen UI round trips however
-        little changed, so a terminal the user is only watching gets them at a
-        lower rate than one they are typing in.
+        little changed, so a terminal the user only watches draws at a lower rate.
         """
         if self.focused:
             return True
@@ -236,8 +235,7 @@ class Terminal:
 
     def _start_rendering(self):
         """Start the reader and renderer threads that drive this terminal."""
-        # deque appends/poplefts are atomic, so the reader never blocks behind
-        # a render; a lock here used to backpressure the pty for whole frames
+        # deque appends/poplefts are atomic, so the reader never blocks behind a render
         chunks = deque()
         done = [False]
 
@@ -274,8 +272,8 @@ class Terminal:
                 try:
                     self.stream.feed("".join(parts))
                 except Exception:
-                    # pyte resets its parser before re-raising, so the terminal
-                    # can carry on; letting this escape would kill the thread
+                    # the parser resets itself before re-raising; letting this
+                    # escape would kill the renderer thread
                     LOG.exception("stream.feed failed, dropping the rest of a chunk")
 
         def renderer():
@@ -322,7 +320,7 @@ class Terminal:
             LOG.warning("resize failed", exc_info=True)
 
     def nudge_repaint(self):
-        """Make the app repaint by briefly narrowing the pty. Never write ctrl+L instead: it is /clear in Claude Code"""
+        """Make the app repaint by briefly narrowing the pty. Never write ctrl+L instead: apps bind it themselves"""
         rows, columns = self.screen.lines, self.screen.columns
         self._set_winsize(rows, max(columns - 1, 1))
         sublime.set_timeout(lambda: self._set_winsize(rows, columns), int(REPAINT_NUDGE_DELAY * 1000))
@@ -342,12 +340,9 @@ class Terminal:
         self.send_string(get_key_code(**kwargs), normalized=False)
 
     def send_string(self, string, normalized=True):
-        """Write text to the pty, chunking anything large.
-
-        Args:
-            normalized: canonicalise line endings for the app's LNM setting;
-                off for escape sequences, which must go through untouched.
-        """
+        """Write text to the pty, chunking anything large"""
+        # escape sequences go through untouched; typed and pasted text has its
+        # line endings canonicalised for the app's LNM setting
         if normalized:
             string = string.replace("\r\n", "\n")
             if mo.LNM in self.screen.mode:
@@ -387,8 +382,6 @@ class Terminal:
 
     def _sync_wheel_flag(self):
         """Publish whether the app owns the wheel, for the mousemap context."""
-        # the mousemap routes the wheel to the app while it reports the mouse
-        # or owns the alt screen; VtermScrollCommand picks the encoding
         captured = self.screen.mouse_reporting_enabled() or self.screen.alternate_buffer_mode
         if captured != self._wheel_captured:
             self._wheel_captured = captured

vterm/utils.py

@@ -52,10 +52,10 @@ def intermission(period=0.1):
 
 
 def rev_wcwidth(text, width):
-    """Return the index into `text` at which the substring reaches `width` cells.
+    """Index into `text` at which the substring reaches `width` cells.
 
-    The inverse of wcswidth: maps a terminal column back onto a character
-    index, so a wide char or a tab does not put the caret in the wrong place.
+    The inverse of wcswidth: maps a terminal column back onto a character index,
+    so a wide char or a tab does not put the caret in the wrong place.
     """
     if width == 0:
         return -1